Everbuild 409 Block Guard Paving Sealer 25L BLOCKGUARD25

Trade Product Option: BLOCKGUARD25 – 25 Litre

Everbuild 409 Block Guard Sealer and Sand Stabiliser in One

Barcode 5029347605780

Sika Code 482658

MPN BLOCKGUARD25

Everbuild 25 Litre Drum of Block Guard 409 a block paving seal and joint sand stabiliser, based on a clear solvent based acrylic formula.

Block guard is designed to form a durable seal over block paving and other mineral paving Slabs.

Penetrates deeply into blocks & sand then cures by solvent evaporation, give a long lasting seal which is resistant to sunlight, water, oil, petrol etc.

Benefits and Areas of Use:

• Long lasting acrylic based formula.
• Helps facilitate easier cleaning.
• Contains a powerful fungicide to help prevent the growth of mould, fungus or weeds.
• Block paved drives and pathways.
• Natural stone patio areas.
• Cement based flagstones etc

Paving Preparation:

Remove all loose material by brush and or vacuum.

For existing areas, remove all oil grease & diesel stains.

Ensure all areas are completely dry before applying Everbuild 409 Block Paving Sealer.

Approximate Coverage:

Varies according to substrate, an average 5-7 meters square per litre per coat.

2 coats recommended recoatable after approximately 3 to 4hrs absolute minimum between coats.

BLOCKGUARD25 Data sheets:

“Important Note this is a non returnable product “

While in our care all products are kept in a climate controlled store room.

We recommend storing this product out of direct sunlight until used.