Everbuild 507 Rendagrip Extra Grip Render Bonding Coating RENDGP10

Everbuild 507 Rendagrip Extra Grip Render Paint on Bonding Coating 10 Litre

Barcode: 5029347612610

MPN: RENDGP10

Benefits:

Extra Grip Render Bonding Agent

For use on concrete, masonry, lightweight block work, brick etc

Contains a fine aggregate to improve render key

Once coat application render when dry

Red colour to indicate coverage

Reduces suction on porous substrates

Improves adhesion on smooth substrates

Can be applied to damp surfaces

Waterproof

Areas For Use:

As a bonding agent for render to concrete, brickwork, blockwork masonry etc

As a bonding agent to improve adhesion to smooth surfaces

All surfaces must be clean sound and dust free

Application:

STIR WELL BEFORE USE

Ensure ambient temperature is above 5 deg C

Ensure substrate is dust, release agent and frost free and is suitable to provide sufficient support

Use 1 coat only

Render Grip Coat should be applied using a short pile roller or brush to give an even coating on rough surfaces you may have to use a longer pile roller sleeve

507 Rendagrip is coloured red to help avoid missing any areas

Protect adjacent surfaces from splashes and remove any 507 Rendagrip before drying with warm soapy water

Allow to dry thoroughly before applying render usually 6 hours minimum

NOTE: drying time will be significantly extended at low temperatures.

Coverage: Approximately 3 meters square per litre depending on porosity and how rough the substrate.

“Take a look at the Official Data Sheets from Everbuild