Everbuild Epoxyset NF Epoxy Adhesive And Bedding Compound 10kg EPOXNF10

Everbuild Epoxyset NF 2 Part Epoxy Adhesive and Bedding Compound 10kg

MPN EPOXNF10

Sika Code 490431

Barcode 5029347607616

Everbuild 10kg tub Epoxy SET NF is an epoxy resin bedding compound which has been designed for use where a non-slumping type of epoxy bedding compound is required.

Two-pack, fine aggregate filled, fast-curing material, ideal for a variety of bedding, gap filling and concrete repair applications.

Everbuild Epoxy SET NF is a stiff but easily workable compound that can be applied by either trowel, spatula or knife.

It cures to give high mechanical properties typically found with epoxy compounds.

It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media

It does not shrink on curing and is designed to be used when cured from 5 degree C to 60 degree C.

Its impact resistance and mechanical strength is significantly greater than that of concrete.

Uses Characteristics and Main Advantages

• For surface repairs of fine cracks and spalls.
• For gap-filling, grouting, bedding fixtures etc.
• For repairs to arises and edge pieces without the use of
  formwork.
• Wherever a thixotropic epoxy mortar is required.
• Repairing vertical honeycomb concrete in abutments or
  overhead repairs on soffits.
• Fixing slip bricks to concrete.
• Securing bolts into walls.
• As a gap-filling adhesive.
• Filling bolt pockets.
• Bedding tiles.
• Repairing concrete posts in situ.
• High strength.
• Non-slump.
• Strong adhesion.
• Chemical-resistant.
• Impact-resistant.
• Non-shrink.
• Trowels to a smooth finish.
• Supplied in pre-weighed units.
• No primer required.

Important Notes

Curing Time

Initial 5 hours.

Final 3 to 5 days.

Pot Life

30 to 60 minutes at 20 degree C

Lower temperatures will retard the cure

Consumption

3kg of mixed product will cover approximately 1.1m square at 1.5mm depth.

EPOXNF10 Data Sheets