Feb Febond Blue Grit Plaster Grip Prep Coat 10 Litre FBBLUE10

Feb Febond Blue Grit Plaster Grip Prep Coat 10 Litre

MPN: FBBLUE10

Barcode: 5029347608880

FEBOND BLUE GRIT 10 LITRE is a one coat high performance plaster bonding agent specifically designed to provide an improved key to smooth surfaces.

Containing a fine aggregate FEBOND BLUE GRIT provides a mechanical key to backgrounds such as plaster, concrete, painted surfaces and glazed tiles.

Bond Strength tested in accordance withEN13892-8.

Typical Uses

• Feb Bond Blue Grit is ideal as a bonding coat for walls prior to plastering, for bonding to difficult substrates such as glass, ceramics, Plastic Laminates,
• MR plasterboard, MDF, pre-cast concrete, and other particle boards even glass.

Features and Benefits

• Provides mechanical Key – Enables plastering over low suction and smooth backgrounds
• Blue colour gives easy identification of area covered
• Simple to apply by roller or brush.
• Ready to use straight from the tub.
• Do not thin.

Instructions For Use

• Preparation of Substrate
• Ensure substrate is dust, release agent and frost free and is suitable to provide sufficient support.

Application

1. Stir well before use and use 1 coat only
2. Ensure ambient and surface temperature is above 5 Deg C
3. Apply using a short pile roller or brush to give an even coating.
4. Feb Bond Blue Coat is coloured blue to help avoid missing any areas.
5. Protect adjacent surfaces from splashes and remove any before drying with warm soapy water.
6. Allow to dry thoroughly before applying plaster usually 24 hours minimum.

NOTE: drying time will be significantly extended at low temperatures.

Feb Bond Coverage:

Coverage approx 4.5m2 per litre depending on porosity of substrate.

FBBLUE10 Official Information

Important Note this is a non returnable product while in our care all products are kept in a climate controlled store room.

The Product should be stored out of direct sunlight until used.